Make your fabric displays look awesome!

Follow our guidelines for best results

For best results use our templates to design your artwork, contact us and we’ll be happy to send over the templates you require.

File Supply Guidelines

Artwork should be supplied at 100% size and should adhere to the following guidelines:

  • Colour mode: CMYK.
  • Ink levels total 300% or lower.
  • Images 50 – 150dpi.
  • All fonts converted to outlines.
  • Minimum 10% tints.
  • Do not try to colour match vector colours to rasterised colours. The rip treats these differently and there will be a visible difference in the final print.
  • No layered .psd files, transparency effects or vector gradients.
  • Save as a high resolution PDF from InDesign.
  • No template guides should be on the final PDF. If they are on your final PDF they will print!
  • Respect the ‘Quiet Zone’ – see below.
  • It’s not a leaflet. Big, bold designs are the most effective.
  • Text should be as large as possible to ensure it is readable from a distance. For ‘small print’ you should not go below 24pt for dark text on a light background, and 48pt for reversed out text.
  •  Single sided flags have 80-90% show through on the reverse.
  • All PDF page boxes should be set to the correct page size (finished size + bleed).

Quiet Zone & Bleed

Respect the ‘Quiet Zone’ (blue shaded area below). Fabric stretches and shrinks (different amounts in different directions) during the production process so there is less accuracy compared to paper.

The templates may appear unusually large or proportioned. This is to allow for the stretch/shrinkage of the material. For best results, keep all important elements such as text and logos well within the quiet zone areas but bleed background images/colours to the page edge. Do not try to match up designs from the front to the reverse.

The trim guide on the template shows roughly where the fabric will be cut. Please bleed your artwork to the page edge.

Finishing fabric displays is a manual process of cutting and stitching, therefore additional bleed is required. For raw fabric add 50mm bleed to each edge of the finished size you require.

The example below is a template for the Rome Fabric Display Stand. The blue area shows the ‘Quiet Zone’ and the red lines indicate where the fabric is trimmed.